PVDF Curtain Hollow Fiber Membrane

All Products

Hollow Fiber Membrane

Flat Sheet Membrane

Self-Cleaning Water Filter

Reverse Osmosis Plant

EDI Module

EDI Pure Water Equipment

Water Treatment Chemicals

Want More Information ?

Product Profile

EcoLan-reinforced PVDF hollow fiber curtain membrane absorbs the advantages of traditional curtain membranes at home and abroad. In addition, it adopts bundled curtain structure, which has the characteristics of high filling density, compact layout, and land saving; uniform and efficient aeration; pollutants are not easy to gather; easy to maintain and replace, etc.

Product Features

High Strength

EcoLan reinforced hollow fiber membrane is a PVDF membrane with a support layer, which has high filament strength and can effectively avoid the problem of hollow fiber filament breakage.

No Peeling

EcoLan has a unique thermal mosaic technology, which makes the PVDF membrane and PET woven tube tightly bonded, so there is no peeling during operation.

High Flux Capacity

EcoLan's high-quality membrane manufacturing technology ensures that the filter skin layer is evenly coated on the support layer of the PET woven tube. As a result, it can achieve uniform pore size and high open pore rate with higher operating flux and effectively reduce the filtration difference.

Double-end Water Production

EcoLan reinforced hollow fiber membrane sheet adopts water production mode's upper and lower ends. As a result, it has higher flux and more uniform pollution load distribution than the traditional single-end water production membrane sheet. It can effectively reduce the transmembrane pressure difference and extend the operation cycle.

Strong Adaptability to Raw Water

EcoLan reinforced hollow fiber membrane sheet is highly adaptable to raw water quality and operates well under fluctuating raw water quality and temperature. As a result, it is suitable for surface water, groundwater treatment, reuse, sewage treatment, and other fields.

Support High-Pressure Water Backwashing

EcoLan reinforced hollow fiber membrane sheet can withstand higher intensity air scrubbing and hydraulic flushing, effectively avoiding the problem of sludge accumulation inside the membrane.

Special Root Protection

The joint between the hollow fiber membrane filament root and the casting layer is the most easily broken place. Therefore, EcoLan adopts unique elastic technology to realize the flexible connection between the root and the epoxy resin casting layer, eliminating the hidden problem of root breakage of hollow fiber membrane filaments.

Product Technical Parameters

Membrane material	PVDF	Membrane type	Reinforced hollow fiber curtain membrane sheet
Filament ID/OD	1.3/2.6mm	Average pore size	0.1μm
Tensile strength	≥200N	Effluent turbidity	<1NTU
Design flux	15~25L/M2.H	Working temperature	1~40°C
Max pH range	2~12	Maximum TMP	10~50 kPa
Aeration intensity	40~100Nm³/m².h	MLSS	4000~13000mg/L
Filtration cycle	20~120 minutes	Filtration mode	Submerged suction filtration (Out to In)
Product water flux	5~60L/M2.H	Filtration mode	Submerged suction filtration (Out to In)

Product Specification Selection

We have several options for standard membranes, and we can customize sizes per customers’ requests. Please note that the membrane is calculated by square meters for each layer of membrane filaments.

Model number	ELM-5080	ELM-2580	ELM-2540
Active membrane area	34㎡	17㎡	7.5㎡
Membrane size	1250 x 2000 x 30mm	625 x 2000 x 30mm	625 x 1000 x 30mm
Filtration accuracy	≤0.1μm